Manual Wedge Grips

SERVO Universal Testing Machines

Manual Wedge Grips

Manual wedge grips are typically for capacities of 20kN or more, with some special types for small capacities. Wedge grips clamp onto the sample with greater force as tension is increased. Typically metal, composite, and hard plastic samples can be held in a wedge grip. Choose wedge grips by their capacity and face dimensions. Wedge grips are attached to the testing machine using eye-end adapters.


GW-2T Capacity: 450lbf, 2kN Adapter: 5/8” Eye End Max. Sample Width.: 0.38” (10mm) Max. Sample Thickness: 0.24” (6mm) Material of Construction: Steel	GW-20T Capacity: 4500 lbf, 20kN Adapter: 1 1/4” Eye End Max. Sample Width.: 1.18” (30mm) Max. Sample Thickness: 0.59” (15mm) Material of Construction: Steel	GW-50T Capacity: 11,250lbf, 50kN Adapter: 1 1/4” Eye End Max. Sample Width: 1.57” (40mm) Max. Sample Thickness: 0.95” (24mm) Material of Construction: Steel	GW-100C Capacity: 22,500lbf, 100kN Adapter: 1 1/4” Eye End Max. Sample Width.: 1.96” (50mm) Max. Sample Thickness: 0.83” (21mm) Material of Construction: Steel	GW-100WT Capacity: 22,500lbf, 100kN Adapter: 1 1/4” Eye End Min. Sample Diameter: 3.07” (78mm) Max. Sample Diameter.: 1.42” (36mm) Material of Construction: Steel Note: For large diameter round samples


GW-600T Capacity: 135,000lbf, 600kN Adapter: 60mm Eye End Max. Sample Width: 2.75” (70mm) Max. Sample Thickness: 1.57” (40mm) Material of Contruction: Steel

All Rights Reserved with www.servoutm.com	Home \| About \| Products \| Servo UTM \| UTM \| Accessories \| Retrofitting \| Contacts \| Sitemap \| Disclaimer