SERVO Universal Testing Machines Home   |   About   |   Products   |   Servo UTM   |   UTM   |   Accessories   |   Retrofitting  |   Contacts
  Flexural Fixtures

Flexural fixtures are used to determine the flexural properties of rigid and semi-rigid materials. They are available in a variety of capacities, support diameter and widths, spans, and 3 or 4 point configurations. Choose a model based on the size of your samples and their strength. Also, fixture design is determined by the material test specification. Fixtures are attached to the testing machine by means of eye-ends.

  
 
FF-250NL   FF-2.5T   FF-10T   FF-50T   FF-100T
FF-250NL
Capacity: 56.25lbf, 250N
Adapter: #10-32 Female
Max. Sample Width.: 0.75”(19mm)
Maximum Span: 2.95” (75mm)
Material of Construction: Aluminum
Note: Threaded connection, not an eye end.
  
FF-2.5T
Capacity: 563lbf, 2.5kN
Adapter: 5/8” Eye End
Support Dia.: 1, 1.5, 2, 3.2, or 5mm
Maximum Span: 6.3” (160mm)
Material of Construction: Aluminum
  
FF-10T
Capacity: 2250lbf, 10kN
Adapter: 5/8” Eye End
Support Dia.: 1, 1.5, 2, 3.2, or 5mm
Maximum Span: 6.3” (160mm)
Material of Construction: Steel
FF-50T
Capacity: 11,250lbf, 50kN
Adapter: 1 1/4” Eye End
Support Dia.: 10, 20, 30mm
Maximum Span: 14.3” (360mm)
Material of Construction: Aluminum
FF-100T
Capacity: 22,500lbf, 100kN
Adapter: 1 1/4” Eye End
Support Dia.: 10, 20, 30mm
Maximum Span: 14.3” (360MM)
Material of Contruction: Steel
                 
FF-300T                
FF-300T
Capacity: 56,250lbf, 250kN
Adapter: 50mm Eye End
Support Dia.: 0.79” (20mm)
Maximum Span.: 23.6” (600mm)
Material of Construction: Steel
     
     
                 
 
All Rights Reserved with www.servoutm.com
Home  |  About  |  Products  |  Servo UTM  |  UTM  |  Contacts  |  Sitemap  |  Disclaimer