SERVO Universal Testing Machines Home   |   About   |   Products   |   Servo UTM   |   UTM   |   Accessories   |   Retrofitting  |   Contacts
  Compression Platens

Compression platens are used to determine the compression characteristics of material samples. Platens are commonly manufactured from aluminum or steel and attach to the testing machine with an eye-end connector appropriate for the load capacity. Choose platens based on sample size and capacity requirements. Spherically seated platens will compensate for horizontal misalignment of the sample.

  
 
CP-10-156T   CP25-56mmT   CP-25T   CP-100-156T   CP-100-156SST
CP-10-156T
Capacity: 2250lbf, 10kN
Adapter: 5/8” Eye End
Max. Sample Dia.: 6.14” 156mm)
Material of Construction: Steel
  
CP25-56mmT
Capacity: 5625lbf, 25kN
Adapter: 1 1/4” Eye End
Max. Sample Dia.: 2.2” (56mm)
Material of Construction: Steel
  
CP-25T
Capacity: 5625lbf, 25kN
Adapter: 1 1/4” Eye End
Max. Sample Dia.: 7.72” 196mm)
Material of Construction: Steel
CP-100-156T
Capacity: 22,500lbf, 100kN
Adapter: 1 1/4” Eye End
Max. Sample Dia.: 6.14” 156mm)
Material of Construction: Steel
CP-100-156SST
Capacity: 22,500lbf, 100kN
Adapter: 1 1/4” Eye End
Max. Sample Dia.: 6.14” 156mm)
Material of Contruction: Steel
Notes: Designed for samples that do not have a level surface.
                 
CP-2900TM   CP-5-136T   CP-20-350T        
CP-2900TM
Capacity: 225,000lbf, 1000kN
Adapter: 3/4”-10 Female Thread
Max. Sample Dia.: 6.5” (164mm)
Material of Construction: Steel
CP-5-136T
Capacity: 1124lbf , 5kN
Adpater: 5/8” Eye End
Max. Sample Size: 4”x4”
(100mm x 100mm)
Material of Construction: Aluminum
CP-20-350T
Capacity: 4496lbf, 20kN
Adapter: 1 1/4” Eye End
Max. Sample Size: 13.75”x13.75” (350mm x 350mm)
Material of Construction: Aluminum
     
                 
 
All Rights Reserved with www.servoutm.com
Home |  About |  Products |  Servo UTM |  UTM |  Accessories  |  Retrofitting |  Contacts |  Sitemap |  Disclaimer